 |
 |
|
Salt Spreader Installation Instructions
Mill
Supply, Inc. Toll
Free |
Mill Supply Tailgate Sand Spreaders
|
 |
     |
| get sand spreader now, new sand spreader yes, get sand spreader now, new sand spreader yes, get sand spreader now, new sand spreader yes, | Sand Spreaders from Mill Supply
Sand spreaders is one of the specialties of Mill Supply. Five different spreaders are currently available plus eleven salt spreders. Mill Supply also carries parts for all our spreaders. |
354-0590 |
SAND/SALT SPREADERS* *(can be converted for SAND with 354-0550 kit) Spreads more than just sand... Spread rock salt/sand, calcium chloride/sand, melting medium/crushed stone, and 100% wet sand, anything less than 1/2" in diameter. Four new components make the salt-to-sand conversion possible. A baffle plate to support the weight of the material. The hopper vibrator to move material downward and off the baffle plate. An extended auger to provide active downward movement out of the auger throat. And a chain distributor to whirl and beat any material tending to cling to the hopper panels.
|
Hopper Sand & Salt Spreader (4 models)This Salt/Sand Spreader is completely self-contained, ultra-durable and, was designed for ice and snow control. The complete assembly mounts easily on pickup, dump and platform trucks making it ideal for municipalities, shopping malls, schools, industries, hospitals and private contractors. Powered by a heavy-duty 8.5 horsepower, air cooled, 4-cycle Briggs and Stratton gasoline engine equipped with an alternator and 12 volt electric starter. Operated by an in-cab start/stop and electric throttle control. A 12 volt DC electric clutch has a three position in-cab switch for greater control and material economy. This also allows for low speed operation and spot spreading. The hopper has 12 gauge steel sides and supports and, has a cross support beam with a central lift point for easy loading and unloading. The conveyer is rated a 22,000 lbs. and can be adjusted 3-1/2". All bushings and drive shafts can be lubricated and greased. A lever operated feedgate uses a friction lock for accurate adjustment. The gate uses a heavy-duty flap to prevent damage to the conveyer chain and material jamming. Three adjustable deflectors allow for complete control of spreading direction to right, left, rear, full or compact spread. Total spread radius ranges from 2' to 25'. An extra wide deflector protects the rear of the under carriage on the vehicle. |
|
354-0590 354-0592 354-0596 354-0599
|
At the heart of the Magnum Salt Spreaders is a direct drive auger/impeller. There is no gear drive to rob power from where it is needed and no drive lubricant to turn to molasses in extreme cold. No gears, no lubricant—you get 75% more auger power, the strongest on the market! The auger and impeller are mounted directly to the motor shaft. No binding from power change-of-direction. Features:
Mounting Methods: FLAT BED MOUNT - Triangulated support frame mounts to flatbed surface. Requires drilling of flatbed to accept mounting bolts (not included). Overall Dimensions: Standard Equipment: Wiring harness, Variable speed controller with on/off & burst positions, Mounting hardware, |
354-0350 |
NEW SUV PRO MODEL
|
|
Pickup Tailgate Salt Spreader
332-0050 -- Rugged thermoplastic hopper resists rust and corrosion. Designed to hold 600 lbs. of #1 rock salt, calcium chloride or similar pelletized material of the same size. Spreads from 3 to 30 feet, ideal for parking lots, driveways, shopping centers, and roadways. Heavy duty sealed ball bearing motor is controlled by an in-cab electronic speed control. Auger and stainless steel spinner assures an even flow of spreading material. Complete with all mounting hardware and quick detach power cables. |
|
Low Profile Tailgate Salt Spreader 332-0060 -- Low Profile Tailgate Spreader The Tailgate Spreader is designed and built for ease of use and safe operation by utilizing a low profile design to allow for full rear view from vehicle. The rugged thermoplastic hopper and powder coated frame provide exceptional resistance to corrosion and rust. The 12 volt spreader motor is housed in a sealed motor chamber to maximize its protection from salt and the elements. The hopper is designed to provide an even flow of 9 cubic feet/600 lbs. #1 Rock Salt or similar material, without the need for expensive auger add-ons or vibration kits. The ultra—smooth 45 degree hopper interior and auger designed to channel material to the stainless steel lined hopper throat and stainless steel spinner. Material flow and spread width from 3 to 35 feet, is controlled from the in-cab electronic spreader control panel. |
SUV Tailgate Salt Spreader 354-0300 - Tailgate Spreader that mounts on 2" receiver mount. Ideal for the home owner/ residential user. The adjustable spread path is designed for one pass coverage of driveways and access roads. DIMENSIONS: 40.5"H x 22.5"W x 20.5"D
|
|
354-0575 354-0580 |
Magnum Receiver Salt Spreaders made by Imperial have incorporated a better idea for long lasting operation. Imperial completed an exhaustive study of light-to-medium duty salt spreaders and found the most common problem was the transmission. Sixty percent of field complaints involved drive mechanisms that would stick or stall. Nearly 40% of users polled had problems with auger power and 27% experienced control or wiring problems. Knowing the weak spots, Imperial set out to eliminate them in the MAGNUM series. These units will spread #1 rock salt, calcium chloride and other ice melting materials in a spread pattern more than 40 feet across. Weight Capacity: 350 Pounds Dimensions: Standard Equipment: Wiring harness, Variable speed controller with on/off & burst positions, Two ratcheting tie-down straps Two Year Warranty |
332-0071 |
Ideal Spreader for Farming, Hunting, Landscaping or Grounds Maintenance! Multi-Purpose Design lets you use it for pellet spreader, seed or fertilizer spreader or game feed spreader *. Adjustable Shut-Off Gate regulates amount dispersed. Easy Mount-Dismount, Quick-Detach Mounting Bracket, Rugged Polymer Hopper, Steel Frame and Components, Powder Coat Finish, Heavy-Duty Design. *Not recommended for Salt. This spreader does not have an auger to break up lumping in salt. |
SBH-2 |
Ideal for Receiver Mount Salt Spreaders weighing up to 350 lbs. Can be mounted on any flat surface, under any bumper, or mount upside down on a flat bed. 3500 lb. towing capacity. |
354-0515 |
Weight Capacity: 500 lbs. Accessory weight: 18 lbs. Mounting Method: Bolts to any flat surface. Can mount on bottom or top of bed. Used with the 5.75 cubic feet Magnum Spreaders. Requires drilling into bed. Bolts not included. Adapter Dimensions: 2.2"H x 16"W x 16"D Construction: Powder coated steel, .25" thick |
UB-612-B |
• Allow receivers to be used as weight carrying hitches UB-612-B - 6" drop, 5" rise, 12" length |
1802200 |
Tri-ball Hitch. Rotate the 2” shank to get the correct ball size for your trailer. Choose from three sizes |
Ridgid Hitch |
Applications for:
|
87-030
BA-230 |
If you plow and own a salt spreader, be sure you have a back alarm mounted to your vehicle. Almost half the time you are plowing or spreading salt in a driveway or a parking lot you are in reverse. Warning local pedestrians from danger is a necessity. Mill Supply, Inc. carries a variety of back alarms to choose from. 87-030 - Bulb Combination Back Alarm Replaces your standard 1156 Back-up Lamp 87-034 - Bulb Combination Back Alarm Replaces your standard 3156 Back-up Lamp BA-230 Surface Mounted Back Alarm - Gives a clear warning to all who are behind a vehicle. Mounts on any flat vertical or horizontal surface. Easily wired to your backup lights or can be actuated by a manual switch. Two year warranty |
|
get tailgate sand and salt spreaders now, new tailgate sand and salt spreders yes. get tailgate sand and salt spreaders now, new tailgate sand and salt spreders yes. get tailgate sand and salt spreaders now, new tailgate sand and salt spreders yes.
|
